Offer details
Description
HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models as well as 1 RU and 2 RU form factor configurations, HP 5800 switches are built on open standards and include an open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network edge of enterprise campus networks.
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located at a remote device
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit (612 per stack)
Performance
• Hardware-based wire-speed access control lists (ACLs): helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
Resiliency and high availability
• Data center–optimized design: the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
• Full-featured console: provides complete control of the switch with a familiar CLI
Layer 2 switching
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located at a remote device
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit (612 per stack)
Performance
• Hardware-based wire-speed access control lists (ACLs): helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
Resiliency and high availability
• Data center–optimized design: the HP 5800AF-48G Switch (JG225A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
• Full-featured console: provides complete control of the switch with a familiar CLI
Layer 2 switching
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
Specifications
Funkce managementu | |
---|---|
Přepínač vrstev | L3 |
Možnosti připojení | |
Počet přepínaných ethernetových portů RJ-45 | 24 |
Počet SFP/SFP+ portů | 4 |
Počet slotů modulu SFP+ | 4 |
Napájecí konektor | Napájecí konektor |
Technologie kabeláže Ethernetu - měď | 1000BASE-T, 100BASE-T, 100BASE-TX, 10BASE-T |
Počítačová síť | |
Síťové standardy | IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u |
Plně duplexní režim | Ano |
Technologie kabeláže Ethernetu - měď | 1000BASE-T, 100BASE-T, 100BASE-TX, 10BASE-T |
Trasa IP | Ano |
Podpora kontroly toku | Ano |
Broadcast storm control | Ano |
Auto MDI/MDI-X | Ano |
Podpora 10G | Ano |
Přenos dat | |
Tabulka MAC adres | 32000 pol. |
Podporované přenosové rychlosti | 10/100/1000 Mbps |
Kapacita přepínání | 208 Gbit/s |
Propustnost | 155 mpps |
Vyrovnávací paměť pro pakety | 4 MB |
Bezpečnost | |
DHCP vlastnosti | DHCP server, DHCP client |
Protokoly | |
Protokoly pro management | IMC, SNMP, Telnet, HTTPS, RMON1, FTP |
Vzhled | |
Instalace do racku | Ano |
Stohovatelné | Ne |
Barva | Černá |
Formát | 1U |
LED indikátory | Ano |
Bezpečnost | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance |
Elektromagnetická kompatibilita | VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A |
Certifikace | RoHs |
Výkon | |
Hlučnost | 52,9 dB |
Typ paměti | SDRAM |
Vnitřní paměť | 512 MB |
Paměť flash | 512 MB |
Stohovatelné | Ne |
Vyrovnávací paměť pro pakety | 4 MB |
Příkon | |
Vstupní napětí | 100 - 240 V |
Spotřeba elektrické energie | 15,4 W |
Napájecí zdroj | AC |
Napájecí konektor | Napájecí konektor |
Power over Ethernet (PoE) | |
Podpora napájení po Ethernetu (PoE) | Ano |
Další charakteristiky | |
Odezva | 4.02 µs |
Rozměry (ŠxHxV) | 467 x 440 x 43,6 mm |
Wi-Fi | Ano |
LED kontrolka napájení | Ano |
Síť | Gigabit Ethernet |
Vstupní frekvence | 50 / 60 Hz |
Rozšiřující sloty | 4x SFP + 1 Exp sl |
Hmotnost (imperiální) | 6 kg (13.2 lbs) |
Rozměry (š x h x v) | 364,5 x 439,9 x 43,7 mm (14.3 x 17.3 x 1.72") |
Vstupní napětí | 100 - 240 V |
Provozní podmínky | |
Provozní rozsah teplot (T-T) | 0 - 45 °C |
Doporučená provozní relativní vlhkost | 10 - 90% |
Tepelné vyzařování | 358 BTU/h |
Hmotnost a rozměry | |
Hmotnost | 6 kg |
Osvědčení | |
Certifikace | RoHs |